Installing a new TomTech III with concrete pump transmitter

This week, a new TomTech III computer was installed for ground displacement piles. All data about production is automatically transmitted to the company's offices through the GPRS data communication element in the computer. The receiver in the computer picks up all...

read more

TomTech III concrete pump transmitters

These two new TomTech III transmitters were installed on new concrete pumps. The transmitters will send real-time data to the TomTech III in the machine cabin about the amount of concrete being pumped into the drill hole. They also include TomRon - extra large display...

read more

New TomTech III on Bauer BG20

We installed a new TomTech III computer for ground displacement piles. This computer includes GPRS data communication, that automatically transmits information to company headquarters for a proof of production. The computer also features a receiver that can pick up...

read more

TomTech III concrete pulses transmitter

This concrete pump from Wig Palen is a new member in our family. It joined approximately 30 other pumps that already have a transmitter, like the one we installed this time. Of course each transmitter carries it's own identity number. The transmitter we installed on...

read more

Rental system to Eritrea

One of our rental systems travelled this week to Eritrea. The client requested to install the system by himself, so the computer was sent together with detailed instructions on the installation and a working manual. We were available for technical assistance 24/7 when...

read more

TomTech III for sand compaction

This TomTech III for Trevi is made to monitor sand compaction. It is the 4th computer that we've made for this client so far. The system also features the automation of the hammer and gps navigation, together with our unique depth meter. This computer was partially...

read more

Repairing an STS-pump

This week we were called to give service to an STS-pump. During the service, our technician found several problems. He fixed them all and tested them extensively. He left the pump in top condition, so our satisfied client was ready again to do a great job.

read more
Keller – Franky pile machine

Keller – Franky pile machine

Our system on the Keller Franky pile machine is monitoring the piling process and controlling the function of the free-fall hammer. It includes a safety system against overuse of the winch and a hydraulic solution for optimising winch-function. We share Keller's...

read more
Voorbij – Crane nr2

Voorbij – Crane nr2

The computer that we built for Crane nr2 of Voorbij, is monitoring the piling of the H-beam in 45-47 degrees with a length of 60 meters. It is transmitting information to the pump operator to keep him updated on all activities on the crane. The computer registers the...

read more
Hevi Machine

Hevi Machine

The Tomer computer for Hevi is controlling and monitoring the double rotary drill and vibrator. It is equipped with a safety stop in case the machine crosses the maximum allowed working-parameters. The computer has an automatic setting for the verticality of the...

read more

Find Us at our NEW Address

NEW Address
Everdenberg 7A
4902 TT, Oosterhout
The Netherlands

Tel: +31 (0)76 571 7717

Navigate to Tomer Systems

About Tomer Systems BV

We are an innovative company, finding solutions for your piling, drilling, engineering and hydraulic problems.